How To Propagate A Snake Plant

Snake plants (Sansevieria trifasciata) are popular houseplants that are known for their attractive foliage and easy maintenance. Propagation of snake plants is relatively simple and can be done a number of ways. The most popular method for propagating snake plants is through division or cutting of the mature plant.

This article will provide step-by-step instructions for propagating a snake plant through division or cutting.

The first step in propagating a snake plant is to gather the necessary materials. These include a pair of sharp scissors, a pot, potting soil, and an appropriate size container to store the cuttings.

After the materials are gathered, the mature snake plant should be carefully examined for any signs of damage or disease. If all looks healthy, the mature snake plant can be cut or divided into smaller pieces. It is important to ensure that each piece contains at least one shoot and some roots.

How To Propagate A Snake Plant

Gather Materials and Prepare the Plant

Gathering the necessary materials and preparing the specimen are the first steps when looking to increase the number of specimens. A potting mix should be selected that is well-draining and high in organic matter, such as one specifically designed for succulents. The soil should be dampened prior to use, as this will help to prevent the specimen from drying out after potting.

The pot should be filled to about two-thirds of the way up, and the specimen should be carefully placed in the center of the pot. The soil should then be gently packed around the specimen, ensuring that the roots are fully covered. The soil selection and potting mix are crucial to the success of propagating a snake plant, as it provides the specimen with the necessary nutrients for growth. Additionally, the soil should be kept damp at all times, to encourage healthy growth and development of the specimen.

The specimen should then be cut into sections, with each section containing at least one node. The node is a small protuberance located on the stem of the plant. It is important to note that the leaves of the specimen should not be cut off, as this can affect the growth of the specimen. Cutting through a node will ensure that the specimen can grow multiple new shoots. The cut should be made at a 45-degree angle, using either a sharp knife or pruning shears. The cuts should be clean and precise, in order to avoid damaging the specimen.

Once the specimen has been cut into sections, each section should be placed in a potting mix, ensuring that the node is below the surface of the soil. The pot should be kept in a warm, bright location, but away from direct sunlight. The soil should also be kept slightly moist, but not soggy, in order to ensure healthy development of the specimen.

With proper care and attention, the specimen should begin to develop new shoots in a few weeks, and the process of propagating the snake plant will be complete.

Cut the Plant

The process of cutting the plant is an essential step in the propagation of the specimen. To begin, the propagator should use a sharp knife or pair of scissors to cleanly cut a section of the snake plant. The section should include at least two nodes with healthy leaves. The cut should be made just below the node.

The propagator should dust the cut section with a light coating of rooting hormone and place the cut section in a container of propagating soil. The soil should be kept lightly moistened to encourage root growth.

Once placed in the soil, the propagator should place the container in a warm, bright location. The propagator should check the soil’s moisture levels every few days to ensure it is not drying out. If the soil begins to dry out, the propagator should water the soil until it is lightly moistened.

After the cuttings have taken root and the propagator begins to see new growth, it will be time to plant the cuttings. The propagator should choose a pot with well-draining soil and carefully transplant the cuttings into the pot.

Plant the Cuttings

Transplanting the cuttings into a pot with well-draining soil is the final step in the propagation process, ensuring that the specimen will continue to thrive and grow. Selecting the proper soil for the pot is essential for snake plant propagation. Succulent potting soil is ideal, as it is formulated to hold just the right amount of water and still provide adequate drainage. It is also important to choose a pot that has a drainage hole in the bottom. This will allow the snake plant to be watered deeply, then excess water will be able to drain out, preventing root rot.

The potting techniques used when planting the cuttings are also quite important. A pot that is larger than the original pot and has a drainage hole should be filled with the chosen soil, leaving a few centimeters of space from the rim. The cuttings should be planted in the soil, allowing 1-2 inches of space between each cutting. The soil should be pressed lightly around the cuttings, being careful not to damage the roots.

Once the cuttings have been planted, the soil should be lightly moistened with a gentle spray from a spray bottle. It is important to note that the soil should never be soaked or soggy, as this can lead to root rot.

With the proper soil selection and potting techniques, the snake plant cuttings should be well-established and ready to start their growth journey. With the proper care and maintenance, these cuttings will grow into healthy and vibrant snake plants.

Water and Care for the Cuttings

Once the cuttings have been potted, proper water and care is essential to ensure healthy growth. The soil should be kept moist but not wet at all times. The snake plant cuttings should be watered when the top two inches of the soil is dry. The soil should be well drained and not overly saturated.

Nutrition is also an important factor to consider when propagating a snake plant. Fertilizing the soil with a well balanced fertilizer every three to four weeks is recommended. The humidity levels should be kept at an optimal level for the plant. A humidifier can be used to keep humidity levels consistent. Additionally, misting the plant can also help with maintaining optimal humidity levels.

Monitoring the growth of the cuttings is also important. Inspecting the leaves for discoloration, wilting or browning is a good way to identify potential issues. If the plant is struggling, transplanting the plant into a larger pot may be necessary. To ensure successful transplanting, it is important to choose a pot with drainage holes.

Monitor Growth and Transplant

Regularly monitoring the growth of the cuttings is necessary to identify any potential issues and determine whether transplanting into a larger pot is necessary.

In order to ensure successful growth of the snake plant, it is important to assess the growth of the cuttings regularly. The soil selection should be carefully considered as the potting mix needs to provide good drainage and contain enough nutrients for the growth of the plant. It is also important to provide the correct amount of light for the snake plant as too much sunlight can lead to sunburned leaves. Therefore, when assessing the growth of the cuttings, it is important to determine if the current soil type and light requirements are providing the optimum conditions for the plant.

When transplanting the cuttings into a larger pot, it is important to use a pot that is slightly bigger than the current one. It is also important to ensure that the pot is big enough to accommodate the growth of the plant and has adequate drainage holes. When transplanting the cuttings, it is important to carefully remove the existing soil from the roots and to ensure that the new soil is of the correct type and is not too compact. After transplanting, the soil should be watered thoroughly to ensure that the plant is properly hydrated.

In order for the snake plant to receive adequate nutrients, it may be necessary to fertilize the soil after transplanting. Fertilizers can be added to the soil in a liquid form or in slow-release granules. It is important to ensure that the chosen fertilizer is suitable for the snake plant and the correct amount is added as too much fertilizer can damage the plant. Additionally, fertilizers should be added to the soil every few months to ensure that the plant is receiving the necessary nutrients to promote healthy growth.

Frequently Asked Questions

What type of soil is best for propagating a snake plant?

When propagating a snake plant, it is important to use a potting mix that provides adequate drainage. A well-draining soil mix is critical for this plant to prevent root rot.

The best potting mix for a snake plant consists of a combination of equal parts of peat moss, perlite, and vermiculite. This mix will not become overly compacted, will provide good drainage for the root system, and will ensure that the plant is provided with the necessary nutrients.

How often should the snake plant cuttings be watered?

The watering frequency of snake plant cuttings is an important factor when propagating the plant. To ensure successful root stimulation, it is recommended to water the cuttings every 10-14 days during the propagation period for optimal results.

Watering should be done using lukewarm water and should be done in such a way as to avoid wetting the leaves. When done correctly, the plants should develop healthy and vigorous root systems in a relatively short amount of time.

How long does it take for the cuttings to take root?

The time it takes for cuttings of a snake plant to take root can vary depending on the rooting methods used. Generally, cuttings will begin to root in two to four weeks when placed in water, while cuttings placed in moist soil may take up to three months to take root.

Factors such as the temperature of the environment and the amount of light available can also affect the root time.

What is the best way to separate the cuttings from the mother plant?

When separating a snake plant for propagation, the best way is to use a clean, sharp knife, such as a sterile kitchen knife, to cut through the rhizome.

It is important to ensure that each cutting has at least one healthy leaf attached, as well as a portion of the rhizome.

The size of the cutting will depend on the size of the mother plant, but should not be too large.

After separating the cutting, it should be placed in a pot filled with a well-draining soil and watered lightly.

The soil should be slightly moist, but not wet. Watering frequency will depend on the soil type, climate, and other environmental conditions.

Should the cuttings be placed in direct sunlight or filtered light?

When propagating cuttings from a snake plant, the environment in which the cuttings are placed should be considered.

Light intensity is an important factor, and it is recommended to place the cuttings in filtered light, rather than direct sunlight.

Temperature should also be taken into account, as the optimal propagation temperature for the snake plant is between 65-75 degrees Fahrenheit.

Too much or too little light or heat can negatively impact the propagation process.


The propagation of snake plants is a simple process that can yield great results. To propagate, first gather the necessary materials – such as a sharp knife, potting soil, and a pot – and prepare the existing plant.

Then, use the knife to make a cut in the stem of the plant and separate the cuttings. Next, plant the cuttings in the soil and water them. After that, regular watering and care is required.

Finally, monitor the growth and transplant the cuttings when they have rooted. With the right materials and proper care, snake plants can be propagated with relative ease.